| Availability: | |
|---|---|
| Quantity: | |
M-HD300
Introduction
This HD extender transmit long-distance over one coaxial. It can transmit signals with a maximum transmission
rate of 750 Mbps. This product use lossless shallow compression technology, which can effectively ensure the
signal transmission without distortion.
The radio frequency signal is based on the principle of broadcasting transmission, using different carriers, can
transmit 100 HD image signals on a single transmission cable. Point-to-point transmission does not need repeater,
and the transmission distance can be up to 300 meters (Distance may be affected by the cable quality and length).
It can use TV transmission branch, distributor, amplifier and other equipment to set up the transmission network,
perfectly solve the actual requirements of various high-definition transmission.
It can realize synchronous playing of 300 meters long distance video with more receivers over TV distributor,
200 meters coaxial can be connected from transmitter to distributor, and 100 meters coaxial can be connected
from receiver to distributor.
Features
1. The MAX distance can be up to 300 meters
2. MAX 12V/1A power adapter
3. Using lossless shallow compression technology
4. Support Intermediate Multi-Node Access
5. Multilevel Lightning Protection
6. The MAX transmission rate of 750 Mbps
7. Support HDCP1.2
8. Plug and play
Specification
Standards | HDCP1.2 |
Resolution | 1080P@60Hz/1080P@50Hz/1080P@30Hz/720P@60Hz/720P@50Hz/480P@60Hz |
Connector | HD-A, BNC Coaxial |
Driver | No need to install driver |
Transmission distance | 300m(Coax 75-3: 100m;Coax 75-5: 300m) |
Power supply | DC 5-12V/1A |
Power dissipation | 3W |
Temperature | Operating: -20℃ ~ +70℃ |
Humidity | Operating: 20% ~ 90%RH(non-condensing) |
Dimension | 95*73*26mm |
Package
1. HD transmitter x1 pc
2. HD receiver x1 pc
3. Power adapter x2 pcs
4. BNC-2-bit twisted-pair adapter x2 pcs
5. User manual x1 pc
Product Interface
TX RX
TX: Transmitter
RX: Receiver
Port name | Description |
HD IN/OUT | HD signal input/output |
Coaxial | Coaxial connect port(if using Cat5/6, can use the adapter) |
DC/5-12V | Power adapter socket |
RESET | Press for 5 seconds to restore system setting to factory default |
LED indicator | Description |
PWR | Unit power indicator |
STA | HD signal indicator |
Installation Process
1. Connect the HD input port of transmitter and the HD output port of the video source with HD cable
(such as DVR/NVR/PC)
2. Connect the HD output port of receiver to the display device with HD cable(such as HDTV)
3. Connect the transmitter Coaxial port to the receiver Coaxial port using a single Coaxial cable(if using
Cat5/6, can use the adapter)
4. Connect the provided power supplies to the power socket of the transmitter and the receiver